Dell OptiPlex 5055 A-Series OptiPlex 5055 Small Form Factor Owners Manual - Page 25
Installing heat sink assembly, Processor, Removing the processor
View all Dell OptiPlex 5055 A-Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installing heat sink assembly 1 Align the screws of the heat sink assembly with the holders on the system board. 2 Place the heat sink assembly on the processor. 3 Replace the 6 captive screws to secure the heat sink assembly to the system board. NOTE: Tighten the screws based on the order given in the system board. 4 Connect the heat sink assembly cable to the connector on the system board. 5 Install the: a optical drive b cooling shroud c 2.5 inch hard drive assembly d front bezel e cover 6 Follow the procedure in After working inside your computer. Processor Removing the processor 1 Follow the procedure in Before working inside your computer. 2 Remove the: Disassembly and reassembly 25
Installing heat sink assembly
1
Align the screws of the heat sink assembly with the holders on the system board.
2
Place the heat sink assembly on the processor.
3
Replace the 6 captive screws to secure the heat sink assembly to the system board.
NOTE:
Tighten the screws based on the order given in the system board.
4
Connect the heat sink assembly cable to the connector on the system board.
5
Install the:
a
optical drive
b
cooling shroud
c
2.5 inch hard drive assembly
d
front bezel
e
cover
6
Follow the procedure in
After working inside your computer
.
Processor
Removing the processor
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
Disassembly and reassembly
25