Dell Latitude 7480 Owners Manual - Page 15

Installing battery, PCIe Solid State Drive (SSD), Removing PCIe SSD

Get Dell Latitude 7480 PDF manuals and user guides View all Dell Latitude 7480 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Installing battery 1 Insert the battery into the slot on the computer. 2 Route the battery cable through the routing clip and connect the battery cable to the connector on the system board. NOTE: Route the battery cable, if the cable at the base of the battery is un routed. 3 Tighten the M2.0 x 5.0 screws to secure the battery to the computer. NOTE: A small battery (3-cell) has a single screw, a larger battery (4-cell) has two screws. 4 Install the base cover 5 Follow the procedure in After working inside your computer. PCIe Solid State Drive (SSD) Removing PCIe SSD 1 Follow the procedure in Before working inside your computer. 2 Remove the : a base cover b battery 3 To remove the PCIe SSD: a Loosen the M2.0x3.0 captive screw that secure the SSD bracket [1]. b Remove the SSD bracket [2]. Disassembly and reassembly 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Installing battery
1
Insert the battery into the slot on the computer.
2
Route the battery cable through the routing clip and connect the battery cable to the connector on the system board.
NOTE:
Route the battery cable, if the cable at the base of the battery is un routed.
3
Tighten the M2.0 x 5.0 screws to secure the battery to the computer.
NOTE:
A small battery (3-cell) has a single screw, a larger battery (4-cell) has two screws.
4
Install the
base cover
5
Follow the procedure in
After working inside your computer
.
PCIe Solid State Drive (SSD)
Removing PCIe SSD
1
Follow the procedure in
Before working inside your computer
.
2
Remove the :
a
base cover
b
battery
3
To remove the PCIe SSD:
a
Loosen the M2.0x3.0 captive screw that secure the SSD bracket [1].
b
Remove the SSD bracket [2].
Disassembly and reassembly
15