Dell Latitude 3490 Owners Manual - Page 28

M2. SATA Solid State Drive (SSD), Removing the M2. SSD card

Get Dell Latitude 3490 PDF manuals and user guides View all Dell Latitude 3490 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

3 Connect the fan cable to the system board. 4 Route the eDP cable through its routing channel on the system fan. NOTE: Display cable should be routed above the WWAN antennas (for models shipped with a WWAN card), and then secured with conductive tape on the palm rest. 5 Install the: a battery b base cover 6 Follow the procedure in After working inside your computer. M2. SATA Solid State Drive (SSD) Removing the M2. SSD card 1 Follow the procedure in Before working inside your computer. 2 Remove the: a base cover b 3 To remove the Solid State Drive (SSD) card: a Remove the two (M2x3) screws that secures the SSD bracket to the system [1], and lift the bracket from the system [2].. b Slide and lift the SSD from the system [3]. 28 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
3
Connect the fan cable to the system board.
4
Route the eDP cable through its routing channel on the system fan.
NOTE:
Display cable should be routed above the WWAN antennas (for models shipped with a WWAN card), and then
secured with conductive tape on the palm rest.
5
Install the:
a
battery
b
base cover
6
Follow the procedure in
After working inside your computer
.
M2. SATA Solid State Drive (SSD)
Removing the M2. SSD card
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
base cover
b
3
To remove the Solid State Drive (SSD) card:
a
Remove the two (M2x3) screws that secures the SSD bracket to the system [1], and lift the bracket from the system [2]..
b
Slide and lift the SSD from the system [3].
28
Disassembly and reassembly