Dell Latitude 3490 Owners Manual - Page 17
Installing base cover
View all Dell Latitude 3490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installing base cover 1 Align the base cover with the screw holders on the computer. 2 Press the edges of the cover until it clicks into place. 3 Tighten the 10 M2.5xL8.5 screws to secure the base cover to the computer. NOTE: Make sure while installing the base cover not to get caught on the VGA port and damage either the base cover or VGA port. 4 Remove the SD card 5 Install the SIM tray (WWAN models). 6 Follow the procedure in After working inside your computer Disassembly and reassembly 17
Installing base cover
1
Align the base cover with the screw holders on the computer.
2
Press the edges of the cover until it clicks into place.
3
Tighten the 10 M2.5xL8.5 screws to secure the base cover to the computer.
NOTE:
Make sure while installing the base cover not to get caught on the VGA port and damage either the base cover
or VGA port.
4
Remove the
SD card
5
Install the
SIM tray (WWAN models)
.
6
Follow the procedure in
After working inside your computer
Disassembly and reassembly
17