Dell Inspiron 5490 Service Manual - Page 49
Connect the power-button cable to the connector on the system board.
View all Dell Inspiron 5490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Steps 1. Align and place the power button with fingerprint reader into the slot on the palm-rest and keyboard assembly. 2. Replace the two screws (M2x3) that secure the power button with fingerprint reader to the palm-rest and keyboard assembly. 3. Replace the two screws (M2x2) that secure the power button with fingerprint-reader bracket to the palm-rest and keyboard assembly. 4. Connect the fingerprint-reader cable to the connector on the power-button board. 5. Connect the power-button cable to the connector on the system board. 6. Close the right-display hinge and replace the two screws (M2.5x5) to secure the right display hinge to the palm-rest and keyboard assembly. Next steps 1. Install the I/O board. 2. Install the fan. 3. Install the battery. 4. Install the base cover. 5. Follow the procedure in After working inside your computer. Removing and installing components 49