Dell Inspiron 24 5430 All-in-One Owners Manual - Page 63
Coin-cell battery, Removing the coin-cell battery
View all Dell Inspiron 24 5430 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Figure 39. Installing the speakers Steps 1. Using the alignment posts and rubber grommets, place the speakers on the slots on the display-assembly base. 2. Route the speaker cable through the routing guide on the display-assembly base. 3. Connect the speaker cable to its connector (SPK1) on the system board. Next steps 1. Install the system-board shield. 2. Install the I/O cover. 3. Install the back cover. 4. Install the stand. 5. Follow the procedure in After working inside your computer. Coin-cell battery Removing the coin-cell battery Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the stand. 3. Remove the back cover. 4. Remove the I/O cover. 5. Remove the system-board shield. About this task The following image indicates the location of the coin-cell battery and provides a visual representation of the removal procedure. Removing and installing Customer Replaceable Units (CRUs) 63