Dell Inspiron 15 7510 Service Manual - Page 60
Palm-rest and keyboard assembly
![]() |
View all Dell Inspiron 15 7510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
9. Connect the keyboard cable to the system board and close the latch to secure the cable. 10. Connect the keyboard backlit cable to the system board and close the latch to secure the cable. 11. Connect the touchpad cable to the system board and close the latch to secure the cable. 12. Connect the speaker cable to the system board. 13. Connect the I/O-board cable to the system board. 14. Adhere the tape that secures the I/O-board cable to the system board. Next steps 1. Install the heat sink. 2. Install the GPU fan. 3. Install the system fan. 4. Install the wireless card. 5. Install the M.2 2280 solid-state drive or M.2 2230 solid-state drive in M.2 slot one, whichever applicable. 6. Install the M.2 2230 solid-state drive in M.2 slot two, if applicable. 7. Install the memory module. 8. Install the battery. 9. Install the base cover. 10. Follow the procedure in After working inside your computer. Palm-rest and keyboard assembly Removing the palm-rest and keyboard assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the memory module. 5. Remove the M.2 2280 solid-state drive or M.2 2230 solid-state drive from M.2 slot one, whichever applicable. 6. Remove the M.2 2230 solid-state drive from M.2 slot two, if applicable. 7. Remove the wireless card. 8. Remove the GPU fan. 9. Remove the system fan. 10. Remove the heat sink. 11. Remove the I/O board. 12. Remove the system board. NOTE: The system board can be removed along with the heat sink. 13. Remove the power-button board. 14. Remove the power button with optional fingerprint reader based on the system configuration. 15. Remove the power button with fingerprint reader based on the system configuration. 16. Remove the power-adapter port. 17. Remove the speakers. 18. Remove the touchpad. 19. Remove the display assembly. About this task After performing the steps in the pre-requisites, you are left with the palm-rest and keyboard assembly. 60 Removing and installing components
![](/manual_guide/products/dell-inspiron-15-7510-service-manual-6736612/60.png)