Dell Inspiron 15 7510 Service Manual - Page 33

Installing the GPU fan, Prerequisites, About this task, Steps, Next steps

Get Dell Inspiron 15 7510 PDF manuals and user guides View all Dell Inspiron 15 7510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Installing the GPU fan Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The figure indicates the location of the GPU fan and provides a visual representation of the installation procedure. Steps 1. Lift the Mylar cover to access the cable connector. 2. Route the I/O cable through the routing guides underneath the GPU fan. 3. Slide and place the GPU fan on the palm-rest and keyboard assembly. 4. Align the screw holes on the GPU fan with the screw holes on the palm-rest and keyboard assembly. 5. Replace the two (M2x4) screws to secure the GPU fan to the palm-rest and keyboard assembly. 6. Connect the GPU fan cable to the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Removing and installing components 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Installing the GPU fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the GPU fan and provides a visual representation of the installation procedure.
Steps
1.
Lift the Mylar cover to access the cable connector.
2.
Route the I/O cable through the routing guides underneath the GPU fan.
3.
Slide and place the GPU fan on the palm-rest and keyboard assembly.
4.
Align the screw holes on the GPU fan with the screw holes on the palm-rest and keyboard assembly.
5.
Replace the two (M2x4) screws to secure the GPU fan to the palm-rest and keyboard assembly.
6.
Connect the GPU fan cable to the system board.
Next steps
1.
Install the
base cover
.
2.
Exit
Service Mode
.
3.
Follow the procedure in
After working inside your computer
.
Removing and installing components
33