DIRECTV HPTURBOWALL User Guide - Page 20

The Add button is used to add a remote device to your network that is not on the displayed list in the lower panel, for example, a device currently on another logical network. Users are advised to locate the Device Passwords for all devices they wish to manage and add them to the local logical network by clicking on the Add button. A dialog box will appear. The dialog box allows the user to enter both a Device Name and the Device Password. A confirmation box will appear if the pass word was entered correctly as in Figure 5. Figure 5 Note... The device must be present on power line (plugged in) in order for the password to be confirmed and added to the network. If the device could not be located, a warning message will be shown. The Scan button is used to perform an immediate search of the HomePlug devices connected to the computer. By default the utility automatically scans every few seconds and updates the display. 3.3 Privacy Screen The Privacy dialog screen provides a means for managing the local network and providing additional security. All HomePlug devices are shipped using a default logical network (network name), which is normally "HomePlug". The Privacy dialog screen allows user to make the network private by changing the network name (network password) of devices. The user can always reset a HomePlug network to the universal one (public) by entering "HomePlug" as the network name or by clicking on the "Use Default" button. See Figure 6. 20 P/N: 92226802 Rev A 5/08