DIRECTV HPTURBOWALL User Guide - Page 17

3.1 Main Screen The Main screen essentially provides a list of all HNP6L-ET devices logically connected to the computer where the utility is running. (If the status is not updated, please close and open the utility again). The top panel shows the local HNP6L-ET device found connected to the computer's NIC (Network Interface Card). See Figure 2. In this case the MAC address of device connected locally to the PC is 00:30:0A:4B:B5:C7. Figure 2 The lower panel displays all the HomePlug devices, identified on the current logical network (remote devices). Displayed immediately above this pane list is the number of remote devices found, the type of logical network (Public or Private), and a message area that reports connectivity and scan status. The following information is displayed for each of the devices discovered that appear in the lower panel. The Device Name column shows the default device name, which may be user re-defined. A user may change the name by clicking on the name and editing in-place, or by using the Rename button. The MAC Address column shows the device's MAC address. The Password column shows the user-supplied Device Password (initially left blank).The Device Password can be found on the label at the back of the unit. A user may enter the password by using the Enter Password button (explained below). 17 P/N: 92226802 Rev A 5/08