D-Link DXS-1210-12TC User Manual - Page 95
Security > Port Security > Port Security Port Settings
![]() |
View all D-Link DXS-1210-12TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
4 Configuration D-Link DXS-1210 Series User Manual Security > Port Security > Port Security Port Settings The Port Security Port Settings page allows you to view and configure the port security port settings of the Switch. Figure 4.150 - Security > Port Security > Port Security Port Settings From Port / To Port: Select the range of ports to be configured. State: Select to enable or disable the port security state of specified ports. Maximum (1-6556): Enter the maximum number of secure MAC addresses that will be allowed on the specified ports. The value is between 1 and 6656. Violation Action: Select the violation action that will be taken. The values are Protect, Restrict, and Security Mode: Select the security mode option. The values are Permanent and Delete-on-Timeout. If you select Permanent to under this mode, all learned MAC addresses will not be purged out unless you manually delete those entries. If you select Delete-on-Timeout, all learned MAC addresses will be purged out when an entry is aged out or when you manually delete these entries. Aging Time (0-1440): Enter the aging time for auto-learned dynamic secured addresses on the specified ports. Aging Type: Select the aging type. The values are Absolute and Inactivity. Select Absolute so that all the secure addresses on this port age out exactly after the time specified and is removed from the secure address list. This is the default type. Select Inactivity so that the secure addresses on this port age out only if there is no data traffic from the secure source address for the specified time period Click the Apply button to save your settings. Security > Port Security > Port Security Address Entries The Port Security Address Entries page allows you to view, clear and configure the port security address entries. Figure 4.151 - Security > Port Security > Port Security Address Entries Port: Select the port to be configured. MAC Address: Enter the MAC address for the specified port. 89
![](/manual_guide/products/dlink-dxs121012tc-user-manual-1257117/95.png)