D-Link DXS-1210-12TC User Manual - Page 72
QoS > Queue Rate Limiting, value in the space
![]() |
View all D-Link DXS-1210-12TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
4 Configuration D-Link DXS-1210 Series User Manual Figure 4.115 - QoS > Port Rate Limiting From Port / To Port: Select the range of ports to be configured. Direction: Select the direction. Available options are Input and Output. When Input is selected, the rate limit for ingress packets is configured. When Output is selected, the rate limit for egress packets is configured. Rate Limit: Enter the Rate Limit for the specified port. When Bandwidth is selected, enter the input/output bandwidth value used in the space provided. This value must be between 64 and 10000000 kbps. Also, enter the Burst Size value in the space provided. This value must be between 0 and 128000 kilobytes. When Percent is selected, enter the input/output bandwidth percentage value used in the space provided. This value must be between 1 and 100 percent (%). Also, enter the Burst Size value in the space provided. This value must be between 0 and 128000 kilobytes. Select the None option to remove the rate limit on the specified port(s). The specified limitation cannot exceed the maximum speed of the specified interface. For the ingress bandwidth limitation, the ingress can trigger a pause frame or a flow control frame when the received traffic exceeds the limitation. Click the Apply button to save your settings. QoS > Queue Rate Limiting The Queue Rate Limiting page allows you to view and configure the queue rate limiting settings. 66
![](/manual_guide/products/dlink-dxs121012tc-user-manual-1257117/72.png)