D-Link DIR-878 User Manual - Page 55
Network
View all D-Link DIR-878 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Section 3 - Configuration Network This section allows you to change the local network settings of the router and to configure the DHCP (Dynamic Host Control Protocol) settings. You can enable the use of the DIR-878 as a DNS server. From the Settings menu, click Network. Click Advanced Settings... to expand the list and see all of the available options. LAN IP Address: Enter the LAN IP Address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Save, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the Subnet Mask of the router. The default subnet mask is 255.255.255.0. Management The default address to access the router's configuration utility is Link: http://dlinkrouter.local./ You may replace dlinkrouter with a name of your choice by entering it into this field. Local Domain Enter the Local Domain Name (optional). Name: Enable DNS If enabled, your computers will use the router for a DNS server. Relay: Disable to transfer the DNS server information from your ISP to your computers. D-Link DIR-878 User Manual 51