D-Link DIR-3040 User Manual - Page 88
Static Route - IPv6
View all D-Link DIR-3040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Section 3 - Configuration Static Route - IPv6 In the Features menu on the bar at the top of the page, click Static Route to access the IPv4 Static Route settings, then click IPv6 to configure the IPv6 Static Routes. To configure the Static Route IPv4 settings, click the IPv4 link. Refer to Static Route - IPv4 on page 83 Click Save at any time to save the changes you have made on this page. If you wish to remove a route, click on the trash can icon in the Delete column. If you wish to edit a route, click on the pencil icon in the Edit column. If you wish to create a new route, click the Add Route button. If you clicked on Edit or Add Rule, the following options will appear: Name Enter a name for the rule. DestNetwork This is the IP address of the router used to reach the specified destination. PrefixLen Enter the IPv6 address prefix length of the packets that will take this route. Gateway Enter your next hop gateway to be taken when this route is used. Metric Enter a route metric value ranging from 0 to 15. This value indicates the cost of using this route. Interface Select the interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-3040 User Manual 84