D-Link DIR-3040 User Manual - Page 78
Firewall Settings - Advanced
View all D-Link DIR-3040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Section 3 - Configuration Firewall Settings - Advanced In the Features menu on the bar at the top of the page, click Firewall to configure the router's firewall settings. The firewall feature protects your network from malicious attacks over the Internet. To configure the IPv4 firewall rules, click the IPv4 Rules link. Refer to Firewall Settings - IPv4/IPv6 Rules on page 76 To configure the IPv6 firewall rules, click the IPv6 Rules link. Refer to Firewall Settings - IPv4/IPv6 Rules on page 76 Click Save at any time to save the changes you have made on this page. Enable DMZ DMZ IP Address Enable SPI IPv4 Enable Anti-spoof Checking IPv6 Simple Security IPv6 Ingress Filtering Enable or disable Demilitarized Zone (DMZ). This completely exposes the client to threats over the Internet, and is not recommended in ordinary situations. If you enabled DMZ, enter the IP address of the client you wish to expose, or use the drop-down menu to quickly select it. Enabling Stateful Packet Inspection (SPI) helps to prevent cyber attacks by validating that the traffic passing through the session conforms to the protocol. Enable this feature to help protect your network from certain kinds of "spoofing" attacks. Enable or disable IPv6 simple security. Enable or disable IPv6 ingress filtering. D-Link DIR-3040 User Manual 74