D-Link DGS-6604 DGS-6608 Hardware Installation Guide - Page 65
Connecting To Network Backbone or Server
![]() |
View all D-Link DGS-6604 DGS-6608 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
DGS-6600 Layer 3 Chassis Ethernet Managed Switch Hardware Installation Guide Connecting To Network Backbone or Server The combo SFP ports and the 1000BASE-T ports are ideal for uplinking to a network backbone, server or server farm. The copper ports operate at a speed of 1000, 100 or 10Mbps in full or half duplex mode. The fiber-optic ports can operate at both 100Mbps and 1000Mbps in full duplex mode. Connections to the Gigabit Ethernet ports are made using a fiber-optic cable or Category 5e copper cable, depending on the type of port. A valid connection is indicated when the Link LED is lit. Figure 3-3 Connecting a DGS-6604 Chassis to a server 54
![](/manual_guide/products/dlink-dgs6604-dgs6608-hardware-installation-guide-d5fab7d/65.png)
DGS-6600 Layer 3 Chassis Ethernet Managed Switch Hardware Installation Guide
54
Connecting To Network Backbone or Server
The combo SFP ports and the 1000BASE-T ports are ideal for uplinking to a network backbone, server or server
farm. The copper ports operate at a speed of 1000, 100 or 10Mbps in full or half duplex mode. The fiber-optic
ports can operate at both 100Mbps and 1000Mbps in full duplex mode.
Connections to the Gigabit Ethernet ports are made using a fiber-optic cable or Category 5e copper cable,
depending on the type of port. A valid connection is indicated when the Link LED is lit.
Figure 3-3 Connecting a DGS-6604 Chassis to a server