D-Link DGS-6604 DGS-6608 Hardware Installation Guide - Page 37
DGS-6600-48T Module
View all D-Link DGS-6604 DGS-6608 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
DGS-6600 Layer 3 Chassis Ethernet Managed Switch Hardware Installation Guide DGS-6600-48T Module The basic appearance of the DGS-6600-48T module is shown in Figure 1-11. The DGS-6600-48T is a line card module of the DGS-6604/6608, which provides 48x10/100/1000 Base-T ports. Figure 1-11 Basic Appearance of DGS-6600-48T Interface The DGS-6600-48T features 48x10/100/1000 RJ-45 ports. LEDs The DGS-6600-48T uses different colored LEDs to indicate different systems status, as described in Table 1-15. LED Indicator Power System Link/Act/ Speed Mode Color and Status Description Solid Green This LED will light solid green when the Switch is powered on. Off This LED will remain off when the Switch is powered off. Solid Green This LED will light solid green when the Switch is operating normally. Solid Red This LED will light solid red when the Switch has failed. Blinking Green This LED will blink green while the Switch is booting up or shutting down. Off This LED will remain off when the Switch is shut down. Solid Green This LED will light solid green when there is a secure connection (or link) to a device that is operating at 1000Mbps. Blinking Green This LED will blink green when there is activity occurring on a port that is operating at 1000Mbps. Solid Amber This LED will light solid amber when there is a secure connection (or link) to a device that is operating at 10/100Mbps. Blinking Amber This LED will blink green when there is activity occurring on a port that is operating at 10/100Mbps. Off This LED will remain off when there is no link on the port. Table 1-15 DGS-6600-48T LED Behavior 26