D-Link DGS-3000-10TC Hardware Installation Guide - Page 17
Installing the Switch without a Rack, Attaching Brackets to a Switch for Rack Mounting
View all D-Link DGS-3000-10TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
DGS-3000 Series Layer 2 Managed Gigabit Switch Hardware Installation Guide Installing the Switch without a Rack First, attach the rubber feet included with the Switch if installing on a desktop or shelf. Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between the Switch and any other objects in the vicinity. Figure 2-1 Prepare the Switch for installation on a desktop or shelf Attaching Brackets to a Switch for Rack Mounting The Switch can be mounted in a standard 19" rack using the provided mounting brackets. Use the following diagrams as a guide. Figure 2-2 Fasten mounting brackets on the Switch Fasten the mounting brackets to the Switch using the screws provided. With the brackets attached securely, the Switch can be mounted in a standard rack, as shown below. NOTE: Please review the Installation Guidelines above before installing the Switch in a rack. Make sure there is adequate space around the Switch to allow for proper air flow, ventilation, and cooling. 9