D-Link DES-6500 Product Manual - Page 102

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual • Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header. • Select IP to instruct the Switch to examine the IP address in each frame's header. • Select Packet Content Mask to specify a mask to hide the content of the packet header. • Select IPv6 to instruct the Switch to examine the IPv6 part of each packet header. VLAN Source MAC Destination MAC 802.1p Ethernet type Selecting this option instructs the Switch to examine the VLAN identifier of each packet header and use this as the full or partial criterion for forwarding. Source MAC Mask - Enter a MAC address mask for the source MAC address. Destination MAC Mask - Enter a MAC address mask for the destination MAC address. Selecting this option instructs the Switch to examine the 802.1p priority value of each packet header and use this as the criterion, or part of the criterion for forwarding. Selecting this option instructs the Switch to examine the Ethernet type value in each frame's header. The page shown below is the IP Access Profile Configuration page. Figure 6- 56. Access Profile Configuration (IP) The following parameters can be set, for IP: Parameter Description Profile ID (1-8) Type Type in a unique identifier number for this profile set. This value can be set from 1 - 8. Select profile based on Ethernet (MAC Address), IP address, Packet Content Mask or IPv6. This will change the menu according to the requirements for the type of profile. • Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header. • Select IP to instruct the Switch to examine the IP address in each frame's header. • Select Packet Content Mask to specify a mask to hide the content of the packet header. 87