D-Link DES-3225G Product Manual - Page 18
BASE-T Device,
View all D-Link DES-3225G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
24-port NWay Ethernet Switch User's Guide ♦ A 100BASE-TX hub or switch can be connected to the Switch via a two-pair Category 5 UTP/STP straight cable. If the other switch or hub contains an unused Uplink port, we suggest connecting the other device's Uplink (MDI-II) port to any of the switch's (MDI-X) ports (1x - 22x, or one of the 100BASE-TX module ports) using a normal straight-through cable, as shown below. If the other device does not have an unused Uplink port, make the connection with a normal straight-through cable from one of the Uplink ports on the switch to any normal crossed port on the hub. Alternatively, if you have a crossover cable you can save the Uplink ports for other connections and make this one from a crossed port to another crossed port. Figure 4-2. Switch connected to a normal (non-Uplink) port on a hub or switch using a straight or crossover cable 10BASE-T Device For a 10BASE-T device, the Switch's LED indicators should display the following: ♦ 100M LED speed indicator is OFF. ♦ Link/Act indicator is ON. 100BASE-TX Device For a 100BASE-TX device, the Switch's LED indicators should display the following: ♦ 100M LED speed indicator is ON. ♦ Link/Act is ON. Connecting The Switch 13