D-Link AC1300 Quick Install Guide 1 - Page 5
Basic Installation
View all D-Link AC1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Basic Installation Hardware Setup To power the access point, you can use one of the following 3 methods: Method 1 - Use if you have a PoE switch or router. Method 2 - Use if you do not have a PoE switch or router and do not have a power outlet near the location of the access point. Method 3 - Use if you do not have a PoE switch or router and have a power outlet near the location of the access point. Method 1 - PoE with PoE Switch or Router 1. Connect one end of your Ethernet cable to the LAN (PoE) port on the access point. 2. Connect the other end into one port on a PoE switch or router. DAP-2610 PoE Switch or Router DAP-2610 Install Guide 3
DAP-2610 Install Guide
3
Hardware Setup
To power the access point, you can use one of the following 3 methods:
Method 1
- Use if you have a PoE switch or router.
Method 2
- Use if you do not have a PoE switch or router and do not have a
power outlet near the location of the access point.
Method 3
- Use if you do not have a PoE switch or router and have a power
outlet near the location of the access point.
DAP-2610
PoE Switch or Router
Method 1 - PoE with PoE Switch or Router
1. Connect one end of your Ethernet cable to the LAN (PoE) port on the access point.
2. Connect the other end into one port on a PoE switch or router.
Basic Installation