D-Link AC1300 Quick Install Guide 1 - Page 4

Hardware Overview

Page 4 highlights

LEDs Hardware Overview 1 Solid Red Indicates the access point has malfunctioned. 1 Power/Status Blinking Red This LED will blink during boot-up. Solid Green Indicates that the DAP-2610 is working properly. Connections 4 23 2 Power Receptor Connect the supplied power adapter. 3 LAN (PoE) Port Connect to a Power over Ethernet (PoE) switch or router via an Ethernet cable. 4 Reset Button Press and hold for five seconds to reset the access point to the factory default settings. Press and hold for one second to reboot the access point. 2 DAP-2610 Install Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

2
DAP-2610 Install Guide
Hardware Overview
LEDs
1
Connections
1
Power/Status
Solid Red
Indicates the access point has malfunctioned.
Blinking Red
This LED will blink during boot-up.
Solid Green
Indicates that the DAP-2610 is working properly.
2
Power Receptor
Connect the supplied power adapter.
3
LAN (PoE) Port
Connect to a Power over Ethernet (PoE) switch or router via an Ethernet cable.
4
Reset Button
Press and hold for five seconds to reset the access point to the factory default settings. Press and
hold for one second to reboot the access point.
2
3
4