D-Link AC1300 Quick Install Guide - Page 4
Installation
View all D-Link AC1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ENGLISH 3. Installation Power on the access point To power on the DAP-2610, you can use ONE of the following methods: 1. Plug one end of your Ethernet cable into the LAN port of the DAP-2610, and the other end into a port on a PoE switch. 2. Purchase separately a DPE-101GI PoE injector if you need to connect the Access Point without a PoE Switch. Configure the access point DAP-2610 OR PoE Switch PoE Injector Power Adapter Computer Computer To set up and manage the DAP-2610, use one of the following methods: 1. Connect the access point and your computer via DPE-101GI. Manage the access point from the computer. Ensure your computer is configured with a static IP address in http://dap2610.local/ subnet. Launch a web browser, type the default IP address of the access point http://dap2610. local/ and then press Enter. Log in to the Administration Web pages. The default login information is: Username: admin Password: admin 2. Connect the access point and your computer to the same switch. Manage the access point from the computer. Enter http://dap2610.local/ in the address field of your browser, which is the default IP address of the access point. Log in to the Administration Web pages. The default login information is: Username: admin Password: admin 4 D-Link DAP-2610 Quick Install Guide