Cobra MR F55B-D MRF55D_MANL_ENG - Page 24

Operating Your Radio Digital Select Calling (DSC) Setup Position Request Reply Type The ability to send your position to another station is an added feature of DSC radios that have GPS attached. It is handy for rendezvous and rescue situations. Your CobraMarine VHF radio allows you to choose whether to have the radio automatically respond to all Position Requests it receives or to alert you to a Position Request and allow you to choose whether to respond or not - manual reply. Position Reply To Set The Position Request Reply Type: 1. Enter the Settings menu and scroll to POS RPLY (position reply) with the Up/Down buttons. 2. Press the Call/Set button and observe the current setting - AUTO or MANUAL. 3. Use the Up/Down buttons to change the setting. Auto/Manual/Exit 4. Press the Call/Set button to select the setting. 5. Use the Up/Down buttons to scroll to EXIT. 6. Press the Call/Set button to return to the Settings menu. Individual Directory DSC calling allows you to call another vessel or station directly if you know its MMSI number. Your CobraMarine VHF radio allows you to store up to 10 names and their associated MMSI numbers for quick access. Individual Directory To Enter Or Edit Names And MMSI Numbers In The Directory: 1. Enter the Settings menu and scroll to INDV DIR (individual directory) with the Up/Down buttons. 2. Press the Call/Set button to enter a memory location (1-10). Location 01 3. Use the Up/Down buttons to scroll through the memory locations to one you want to select. Operating Your Radio New Individual Enter MMSI Next/Exit Digital Select Calling (DSC) Setup 4. Press the Call/Set button to select the memory location. The cursor will begin to blink at the first character under NAME. 5. Use the Up/Down buttons to scroll through the character list. 6. Press the Call/Set button to select a character. This will also move the blinking cursor to the next character under NAME. 7. Repeat steps 5 and 6 to enter additional characters - up to a maximum of nine (9) - for the name. NOTE Press the High/Low Power button to backspace and erase the last selected character. 8. After entering the name, press and hold the Call/Set button to move the blinking cursor to the first character under MMSI. 9. Use the Up/Down buttons to scroll through the number list. 10. Press the Call/Set button to select the number and move the cursor to the next character under MMSI. 11. Repeat steps 9 and 10 until the nine (9) digit MMSI is entered. 12. Press and hold the Call/Set button to move to the next memory location or exit. 13. Select NEXT or EXIT with the Call/Set button. If NEXT is selected, pressing the Call/Set button will move to the next memory location where another name can be entered by repeating steps 3 through 11. If EXIT is selected, pressing the Call/Set button will return you to the Settings menu. You can enter a total of 10 names and MMSI numbers in the directory. 42 English Nothing Comes Close to a Cobra® 43