Cisco CSACS-1121-K9 Reference Guide - Page 54
acs reset-config, Example 1
![]() |
View all Cisco CSACS-1121-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
EXEC Commands Appendix A ACS Command Reference Command Modes EXEC Usage Guidelines ACS patches contain small fixes that include isolated files, not a full version of the ACS software. ACS patch installations and removals require that you restart ACS. Examples Example 1 acs/admin# acs patch install acspatch.tar.gpg repository myrepository Installing an ACS patch requires a restart of ACS services. Would you like to continue? Y/N Example 2 acs/admin# acs patch remove acspatch.tar.gpg repository myrepository Removing an ACS patch requires a restart of ACS services. Would you like to continue? Y/N Related Commands Command show application show version Description Shows application status and version information. Displays information about the software version of the system. acs reset-config To reset the ACS configuration to factory defaults, use the acs reset-config command in the EXEC mode. acs reset-config Syntax Description No arguments or keywords. Defaults No default behavior or values. Command Modes EXEC Usage Guidelines If you use the acs reset-config command to reset your ACS to the factory default configuration, any configurations you have performed are lost; however, the appliance settings (such as network settings and backup repositories) are not affected. ACS does not need to be running when you use this command. Examples acs/admin# acs reset-config This command will reset the ACS configuration. A-16 CLI Reference Guide for the Cisco Secure Access Control System 5.1 OL-18996-01
![](/manual_guide/products/cisco-csacs1121k9-reference-guide-af59996/54.png)