Canon imageCLASS MF448dw imageCLASS MF449dw / MF448dw / MF445dw User Guide - Page 432
Starting Remote UI, When the Department ID Management is disabled
View all Canon imageCLASS MF448dw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 432 highlights
Managing the Machine Starting Remote UI 524J-084 To operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI. Check the IP address set to the machine in advance ( Viewing Network Settings(P. 39) ). If you have any questions, ask your Network Administrator. When the Department ID Management is disabled ● To log in to the Remote UI, you need to set a Remote UI Access PIN on the machine beforehand. Setting a Remote UI PIN(P. 367) When logging in to System Manager Mode (MF449dw / MF448dw) ● To log in to System Manager Mode (System Manager ID), you first need to change the System Manager PIN from the default setting. Setting the System Manager ID and PIN(P. 359) 1 Start the Web browser. 2 Enter "http:///" in the address field, and press the [ENTER] key. ● If you want to use an IPv6 address, enclose the IPv6 address with brackets (example: http:// [fe80::2e9e:fcff:fe4e:dbce]/). If a security alert is displayed ● A security alert may be displayed when the Remote UI communication is encrypted ( Configuring the Key and Certificate for TLS(P. 385) ). When certificate settings or TLS settings have no errors, continue browsing the Web site. 3 Log in to the Remote UI. When the Department ID Management is disabled Select [System Manager Mode] or [General User Mode], and enter a value in [Remote UI Access PIN] as necessary. 424