Canon REALiS WUX400ST D Pro AV User Manual - Page 74
Adjusting the Image Position, If the Short Fixed Focus Lens RS-IL03WF is attached
View all Canon REALiS WUX400ST D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Adjusting the Image Adjusting the Image Position To adjust the screen position up, down, left, or right, press the LENS-SHIFT button (WUX5000 / WUX4000) or SHIFT button (WX6000 / SX6000) on the remote control, or the LENS button on the projector. This function is referred to as "lens shift". It can change the projected screen to the most suitable position by moving the position of the lens up/down/ left/right. (P160) • The available range for lens shift (percentage of movement relative to the screen size) varies depending on the lens unit which is used. (P161) • There are areas where each lens is unable to move. With the Short Fixed Lens (RSIL03WF), the areas are at the four corners and for the other lenses, the areas are at the top left and bottom right. (P161) 1 Press either the LENS-SHIFT button (WUX5000 / WUX4000) or the SHIFT button (WX6000 / SX6000) on the remote control, or the LENS button on the projector 3 times in order to display the window shown below. * If the Short Fixed Focus Lens (RS-IL03WF) is attached, when the LENS button on the projector is pressed twice, the window below will be displayed. Remote control Projector Remote control Push three times* 74