Canon REALiS WUX400ST D Pro AV User Manual - Page 190
Error Mail
View all Canon REALiS WUX400ST D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Error Mail The messages shown in the following error list are sent when an error occurs in the projector. Error list Errors related to temperature Errors related to the lamp Errors related to the lamp cover Errors related to the cooling fan Errors related to the power supply Errors related to the lens connector Errors related to the air filter Other types of errors Error name Text Error name Text Error name Text Error name Text Error name Text Error name Text Error name Text Error name Text Temperature abnormality The temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one. If the problem is inside the projector, check whether the projector is installed and operated normally, turn off the projector to cool its inside, and retry projection. If the same warning occurs again, the projector may be defective. Contact your dealer. Faulty lamp The lamp has burnt out. Replace the lamp with a new one. If the same warning occurs again, the lamp drive circuit may be defective. Contact your dealer. Faulty lamp cover The lamp cover is open. Check whether the lamp cover is installed properly. If it is installed properly, the lamp cover detection switch may be defective. Contact your dealer. Faulty cooling fan The cooling fan or another component may be defective. Contact your dealer. Faulty power supply The voltage of part of the power supply is abnormally high or any other problem has occurred in the power supply. Contact your dealer. Faulty lens connector The lens cable is not connected to the lens unit. Check whether the lens cable is connected to the lens unit properly. If it is connected properly, the lens connector or cable may be defective. Contact your dealer. Faulty air filter unit The air filter unit is not installed properly. Check whether the air filter unit is installed properly. If it is installed properly, the air filter unit detection switch may be defective. Contact your dealer. Unknown Error Code in hexadecimal numbers* * For details, contact the Canon Customer Support Center. 190