Canon REALiS LCOS WUX6700 WUX7500 WUX6700 WUX5800 Users Manual - Page 203
Mail Authentication Settings, Sending a Test Mail, procedure, see Network Setting
View all Canon REALiS LCOS WUX6700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Projector Web Screen Menu Item Explanation Factory default setting Mail resend times Enter the number of times to resend 3 mail when an error occurred within the range of 0 - 255 using 1-byte numbers. * When the interval is set to 0 seconds, repeated attempts to send mail are made (as set in [Mail resend times]) without pausing between attempts. Mail Authentication Settings From [Mail auth] under [Mail] in the settings screen, you can configure the settings for authentication of mail that is sent when an error occurs. For the setting procedure, see "Network Setting" (P89). Item Mail authentication User name Password Confirm password IPv4 POP3 server IP address IPv4 POP3 server port number IPv6 POP3 server IP address IPv6 POP3 server port number Explanation Factory default setting Select the mail authentication method. If [OFF] is selected, the other mail authentication settings cannot be changed. OFF Enter the user name to use for mail authentication in 1-byte alphanumeric characters and symbols (1 - 63 characters). Enter the password for mail authentication in 1-byte alphanumeric characters and symbols (1 - 63 characters). For confirmation, enter the same password as you entered in [Password]. Enter the POP3 server IP address (IPv4) in 1-byte numbers. 0.0.0.0 Enter the POP3 server port number 110 (IPv4) in 1-byte numbers (1 - 65535). Enter the POP3 server IP address (IPv6) in 1-byte numbers. Enter the POP3 server port number 110 (IPv6) in 1-byte numbers (1 - 65535). POP before SMTP response time Enter the SMTP authentication timeout 300 period after POP3 authentication (unit: milliseconds) using 1-byte numbers (0 - 9999 milliseconds). Sending a Test Mail You can send a test mail to the mail address specified in [Mail] under [Mail] in the settings screen by clicking [Send test mail] at the bottom of the screen. Menu Guide Projector Web Screen Menu 201