Canon REALiS LCOS WUX6700 WUX7500 WUX6700 WUX5800 Users Manual - Page 19
technician or the Canon Customer Support Center., sponge mat, etc.
View all Canon REALiS LCOS WUX6700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Safety Instructions Safety Instructions Pay attention to the following points regarding installation and handling of the projector. Failure to do so may cause a fire, electric shock or personal injury. • Light from the projector is classified as Risk Group 2 (RG2) according to IEC 62471-5:2015. However, it may be classified as Risk Group 3 (RG3) when a replacement lens with a projection ratio larger than 2.6 is used. Refer to the Hazard Distance table for various replacement lenses (P18). • Do not hold or install optical instruments (such as magnifying glasses, reflectors, or glasses) in the path of light from the projector. If projected light is refracted or reflected and enters people's eyes, it may result in eye injury. • No direct exposure to the beam shall be permitted. • Do not lift the projector alone. Have at least one assistant. • When setting the projector on a high surface for projection, be sure the surface is flat and stable. • Do not use the projector on a soft surface such as carpet or sponge mat, etc. • For ceiling mounting or other installation work, request service from a qualified technician or the Canon Customer Support Center. Poor installation work could result in an accident. • To avoid hazards such as parts falling when the lens of a ceilingmounted projector is replaced, request service from a qualified technician or the Canon Customer Support Center. • Do not use where combustible or explosive gases may occur. The lamp in the projector becomes hot and poses a risk of fire if it ignites. 17