Canon REALiS LCOS 4K500ST User Manual - Page 146
Controlling the Projector from a Computer, Click [Projector control] on the web screen.
View all Canon REALiS LCOS 4K500ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Menu Settings Controlling the Projector from a Computer When the projector is connected to a network, it is possible to control the projector from a computer via the network. 1 Turn on the computer and projector. 2 Launch a web browser, enter "http://(projector IP address)" in the address bar, and press the Enter key. The projector web screen appears. The factory default IP address is "192.168.254.254". If DHCP settings are used, ask the network administrator for the projector IP address. It is possible to check the IP address from the projector menu. 3 Click [Projector control] on the web screen. The password input window appears. 4 Enter the user name and password on the password input window, then click [OK]. The factory default user name is "root" and the password is "system". The projector control screen appears. The projector can be controlled from this screen. Item Projector name Comment Refresh Power Input Aspect Image mode Blank Mute Explanation The name of the connected projector is displayed. (P141) Shows notes, such as where the projector is installed. (P141) Refreshes the displayed contents with the most recent information. Turns projector power on or off. Select an input signal and click [Apply] to change to that input signal. (P63) Select an aspect and click [Apply] to change to that aspect. (P72) Select an image mode and click [Apply] to change to that image mode. (P76) Switches the blank setting on or off. (P80) Switches the mute setting on or off. (P31) 146