Canon LX-MU700 User Manual - Page 50
CONTROL Menu, Label, Description, ENTER, Standard, Network, RS232
View all Canon LX-MU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Label H Shift V Shift Reset CONTROL Menu Description Press ◄ or ► to move the narrowed projected image horizontally. The function is only available when the image is narrowed. Press ◄ or ► to move the narrowed projected image vertically. The function is only available when the image is narrowed. Press ENTER to set to the default value. Label Description Standby Mode Press ◄ or ► to select a standby mode. The options are Standard, ECO and Network. Refer to the "Note" on page 50 for details. Auto Power Off Press ◄ or ► to enable or disable turning off the projector when no input signal is received within 15 minutes. Direct Power On Press ◄ or ► to enable or disable turning on the projector when connect to an AC power. Network Press ENTER to enter the Network menu. See "Network Menu" on page 45. RS232 Press ENTER to enter the RS232 menu. See "RS232 Menu" on page 50. Startup Logo Press ◄ or ► to enable or disable the Startup Logo. Trigger Press ◄ or ► to enable or disable turning on the screen when the projector is powered on. Auto Search Press ◄ or ► to enable or disable auto search function. Dynamic Black* Press ◄ or ► to enable or disable dynamic black function 3D Press ENTER to enter the 3D menu. See "3D Menu" on page 54. Note: Before adjusting the 3D setting, ensure the input signal is connected. * Optimizes the contrast depending on the brightness of each scene by adjusting lamp output automatically based on the brightness data from the input source. 44