Canon LX-MH502Z Users Manual - Page 46
SYSTEM SETUP: ADVANCED menu, Audio, Settings, Volume, HDMI Range, Full Range, Limited Range, Security
![]() |
View all Canon LX-MH502Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
SYSTEM SETUP: ADVANCED menu Function HDR Audio Settings HDMI Range Security Settings Description • HDR: The projector supports HDR imaging sources. It can automatically detect the dynamic range of the source, and optimize image gamma and color settings to reproduce contents under wide range of light conditions. You can manually set it to SDR forcibly. • EOTF: The projector can automatically adjust the brightness levels of your image according to the input source. Normally, the default setting "Mid" is recommended. If the brightness of the projected image is dark, please use "Low". When giving priority to gradation property, please use "High". • Volume: Adjusts the sound level. • Mute: Temporarily turns off the sound. • Auto: Sets the projector to detect the HDMI range of the input signal automatically. • Full Range: Sets the HDMI color range as 0 - 255. • Limited Range: Sets the HDMI color range as 16 - 235. For security purposes and to prevent unauthorized use, you may set up password security for the projector. This limits use of the projector to only those who know the correct password. If you enter an incorrect password 5 times in succession, the projector will automatically shut down in a short time. You will be inconvenienced if you enable this function yet forget the password somehow. Do make a note of your password, and keep the note in a safe place for later recall. You will be asked to set a new password if no password has been set before. As the on-screen display indicates, the 4 arrow keys ( / / / ) respectively represent 4 digits (1, 2, 3, 4). Use the arrow keys to set a 6-digit password. The digits display as ****** when you enter them. • Change Password You will be asked to enter the current password before changing to a new one. • Power On Lock You will be asked to enter the current password before changing the setting. Once a password has been set and the power on lock is enabled, the projector cannot be used unless the correct password is entered every time the projector is started. If you forget the password, reset the password function: 1.Turn the projector off. 2.Unplug the power cord. 3.Long press on and until the power cord was plugged after POWER indicator light goes off. Now the password function has been reset and the Power On Lock is Off. You can turn on the projector without entering any password. 46 Menu operation
![](/manual_guide/products/canon-lxmh502z-users-manual-3fd1437/46.png)