Canon LV-7292M User Manual - Page 56
Standby, Timer, No signal, Power management mode, Direct power on, HDMI setup, Image, Normal, Enhanced
View all Canon LV-7292M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Setting HDMI setup This function is only used for HDMI input source. Image Select Normal or Enhanced to match the video range setting of your HDMI Digital RGB equipment. Sound HDMI: W hen using the HDMI cable, select HDMI. B oth video and audio are transferred and you need not to connect any additional cables for audio. COMPUTER : W hen using the DVI-HDMI cable, select COMPUTER and connect the audio cable to COMPUTER IN termimal. The names for the output setting of Digital RGB vary from equipment to equipment. For details, refer to the user's manual of your Digital RGB equipment. When the black parts of the image are destroyed or stand out, please switch to Normal or Enhanced, and then switch the output type of the HDMI Digital RGB output equipment. Power management mode For reducing power consumption as well as maintaining the lamp life, the Power management mode function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Standby........ When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the top control or remote control unit is pressed. Exit When the lamp has been fully cooled down, the power will be turned off. Off Power management mode function is off. Timer If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with No signal appears. It starts the countdown until the lamp is turned off. Use the Point ▲▼ buttons to set the Timer (1~30min). Note: Factory default is Standby: 5 min. Direct power on When this function is set to On, the projector will be automatically turned on just by connecting the AC power cord to a wall outlet. 56 HDMI setup Power management mode Time left before Lamp is off. Note: Be sure to turn off the projector properly (see "Turning Off the Projector" on page 23). If the projector is turned off in the incorrect sequence, the Direct power on function will not work properly.