Canon LV-7290 Serial Functional Specification - Page 46
Other Command, 11.1 CF_KEYENU Command, 11.2 CF_MENU Command, 11.3 CF_POWER Command
![]() |
View all Canon LV-7290 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
LV-7290 / LV-7295 / LV-7390/ LV-8225 Expand Serial Command Functional Specifications 8.11 Other Command 8.11.1 CF_KEYENU Command Command "CF_KEYENU_%1"[CR] "RIGHT Shift Pointer on OSD Menu to right "LEFT Shift Pointer on OSD Menu to left %1 "UP Shift Pointer on OSD Menu to right "DN Shift Pointer on OSD Menu to right "SELECT Behave the same as OK key "AUTOPC Execute Auto PC Details This command behave the same as corresponding keys of Remote Control / Projector Auto PC keeps operating even though projector receives this command again while Auto PC is in process. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.11.2 CF_MENU Command Command "CF_MENU_%1"[CR] %1 "ON Display OSD Menu "OFF Cancel OSD menu Details Display / Cancel On Screen Display Menu This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.11.3 CF_POWER Command Command "CF_POWER_%1"[CR] "ON Power ON projector "OFF Power OFF Projector Note1) Countdown can be terminated by sending this command. %1 Note2) Projector returns error code due to unable of command execution depends on its condition. Note3) Although projector returns "OK", operation may not be proceeding properly. (e.g. After returning "000" for Power ON command, projector gets abnormal temperature.) Use Status read command to get projector states. Details Power ON / OFF projector. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 46
![](/manual_guide/products/canon-lv7290-serial-functional-specification-9826be8/46.png)