Canon EOS D60 Instruction Manual - Page 22
Charging the Battery Pack
![]() |
View all Canon EOS D60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Charging the Battery Pack 1 Connect the power cord. ● Connect the power cord to the compact power adapter. ● Insert the plug into a power outlet. 2 Remove the cover. ● Store the cover in a place where it will not be lost. ● If you remove the battery from the camera, be sure to reattach the cover to protect against short circuit. < -> mark 3 Place the battery in the adapter. ● Align the end of the battery with the < -> mark on the adapter, press down on the battery, and slide it into place. ● To remove the battery, use the reverse of the above. ● Batteries can be charged in either the left or right side of the adapter. Battery charge Charge lamp 0-50% Blinks once per second 50-75% Blinks twice per second Over 75% Blinks three times per second Almost full Stays on 4 Charge the battery pack. ➡ As soon as you place the battery pack in the compact power adapter, the charge lamp starts blinking and charging begins. ➡ When charging is complete, the lamp stops blinking and stays on. ➡ It can take up to 90 minutes to fully charge a battery pack. ● You can check whether a battery is charged by seeing whether the charge lamp blinks or stays on. ➡ When charging is complete, the charge lamp stops blinking and stays on. You can continue charging the battery for approximately an hour to reach full charge capacity. ● When charging is complete, remove the battery and unplug the power cord from the outlet. 22
![](/manual_guide/products/canon-eos-d60-instruction-manual-a870a7e/22.png)