Bose SoundLink Mini II English Owners Guide - Page 3

Important Safety Instructions  Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/ EC, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013. Required Power State Information Standby Power Modes Networked Standby Power consumption in specified power mode, at 230V/50Hz input ≤ 0.5 W Bluetooth® ≤ 2.0 W Time after which equipment is automatically switched into mode ≤ 30 minutes ≤ 5 minutes Power consumption in networked standby if all wired N/A network ports are connected and all wireless network ports are activated, at 230V/50Hz input ≤ 2.0 W Network port deactivation/activation procedures. Deactivating all networks will enable standby mode. Bluetooth: Deactivate by clearing the pairing list by pressing and holding the Bluetooth button for 10 seconds. Activate by pairing with a Bluetooth source. External Power Supply Technical Information The external power supply provided with the product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in compliance with the following norms(s) or documents(s): Commission Regulation (EU) 2019/1782. Manufacturer Commercial registration number Address Model identifier Input voltage Input AC frequency Output voltage Bose Products B.V. 36037901 Gorslaan 60 1441 RG Purmerend The Netherlands S008XM0500160 100V-240V 50Hz/60Hz 5V DC Output current 1.6A Output power 8W Average active efficiency Efficiency at low load (10%) 79.4% 75.8% No-load power consumption 0.05W For Europe: Frequency band of operation 2400 to 2483.5 MHz. Maximum transmit power less than 20 dBm EIRP. Maximum transmit power is below regulatory limits such that SAR testing is not necessary and exempt per applicable regulations. English - 3