Bosch SHXM4AY55N Installation Instruction - Page 12

Attaching Water Inlet and Drain Hose

Page 12 highlights

Attaching Water Inlet and Drain Hose 4 • Carefully flip the unit over. Remove the toe panel from the front of the unit and retain for attachment to the front at a later time. Loosen the leg levelers slightly. 5 • Attach elbow joint to dishwasher as shown. Do not overtighten. • Attach hot water line to elbow. Use two wrenches to tighten to avoid putting stress on the water inlet valve. NOTICE Avoid cross-threading! It will cause leaks. After attaching hose, temporarily hook up the water supply then turn on water to check for leaks. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

12
Carefully flip the unit over. Remove the toe panel from the front of the
unit and retain for attachment to the front at a later time. Loosen the leg
levelers slightly.
Attaching Water Inlet and Drain Hose
Attach elbow joint to dishwasher as shown. Do not overtighten.
Attach hot water line to elbow. Use two wrenches to tighten to avoid
putting stress on the water inlet valve.
Avoid cross-threading! It will cause leaks. After attaching hose, temporarily
hook up the water supply then turn on water to check for leaks.
NOTICE
4
5