BenQ XL2735 User Manual - Page 39

Depending on the operating system on your PC, different procedures should be followed to adjust the screen refresh rate. Refer to the Help document of your operating system for details. b. Go to the setup menu in your game, and change the frame rate or screen refresh rate to 144 Hz / 240 Hz. Refer to the Help document that came with your game for details. To check if the screen refresh rate has been changed, select Menu from the hotkey menu on your monitor, and go to System and Information. The refresh rate in Current Resolution should be 144 Hz / 240 Hz. If 144 Hz / 240 Hz is not available in your menus, check the following: • make sure the HDMI 2.0 cable or DisplayPort cable is properly connected to your computer and the monitor • make sure your GPU supports 144 Hz / 240 Hz • make sure your game supports 144 Hz / 240 Hz. 2. Select an appropriate game mode for your game. FPS is for FPS games, while RTS is for RTS games. For more game modes, please see Setting up your own game mode on page 40. 3. Adjust the brightness of your display. See Brightness on page 47. 4. Adjust the brightness of the black shades by Black eQualizer. See Black eQualizer on page 44. 5. Adjust the monitor height. See Adjusting the monitor height on page 21. Due to graphic limitation on some of the graphic cards, the headphone jack on the monitor may not output audio signal. To output audio signal in this case, please use the headphone jack on the PC. Customizing the hot keys The left 3 control keys (also called custom keys) perform as hot keys to provide direct access to pre-defined functions. You can change the default setting and designate different functions for these keys. 1. Press any of the control keys, or the wheel, or the return button on the S Switch to bring up the hot key menu. 2. Select (Menu) to access the main menu. 3. Go to System and Custom Key. How to adjust your monitor 39