BenQ XL2735 User Manual - Page 25
Installing the Shield (shading hood), Prepare for the shield installation.
View all BenQ XL2735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installing the Shield (shading hood) To help focusing in games, the Shield (shading hood) avoids the unwanted disturbance interfered with the peripheral vision while playing. Two shading hoods are inside the accessory box. Please be careful to prevent damage to the Shield and the monitor. The shading hoods are well-designed and can fit into your monitor properly. Do not use excessive force when installing Shield to avoid possible damage. 1. Prepare for the shield installation. Place the monitor upright on its stand on a flat even surface. Make sure the monitor is rotated to the landscape mode. 2. Remove the stickers and the rubbers on both sides of the monitor. There are 2 screw holes protected by rubbers and stickers on each of the right and the left side of the monitor. Remove the stickers and the rubbers before shading hood installation. Keep the rubbers and insert them back to the holes if Shield has been removed. 3. Attach the Shield to the monitor. Two shading hoods are not identical. The logo should be facing outward on the upper section. Attached the hoods by using a coin or a flat-head screwdriver and push the screws into the holes appropriately. 2 1 2 1 3 2 1 How to assemble your monitor hardware 25