BenQ RP750K Installation Handbook - Page 50
Install panel display to the bracket, Secure device box to the bracket
View all BenQ RP750K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
4. Remove the flat head screws (M3xL8) (C) with a Phillips screwdriver before pulling open the plastic cover to the left and right. 5. Remove the spring washer and nut from the expansion screw and secure the bracket (A) to the ceiling. Places washers in sequence as shown below when securing the bracket to ceiling: Bracket (A)=> spring washer => nut Install panel display to the bracket Secure the display frame (E) to the display with the included flat head screws (M4xL10) (D) by a Phillips screwdriver. Secure device box to the bracket 1. Remove flat head screws (M3xL8) (C) with a Phillips screwdriver before removing the front cover of the device box (F). 2. Secure the display box (F) to the display with the included flat head screws (M3xL8) (C) by a Phillips screwdriver. 50 Mounting installation