BenQ PH460 RS232 Commands for PDP and IFP Products - Page 20
If Byte1=0x00IP Setup Mode at Input
View all BenQ PH460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Network Setting 14 ʳ g Input Value: Byte1 - Byte2 - Byte3...Byte9 (1) Byte1=0x00: IP Setup Mode Byte1=0x01: IP Address Byte1=0x02: Get Subnet Mask Byte1=0x03: Default Gateway Byte1=0x04: Primary DNS Byte1=0x05: Secondary DNS Byte1=0x06: MAC Address (2) Byte2~9 are reserved, should be 0x00. Return value: Byte1 - Byte2 - Byte3...Byte9 The Byte1 at the return value should be the same as the value of Byte1 at Input value. Byte2~Byte15 should be hex value format (1) If Byte1=0x00(IP Setup Mode) at Input value, the return value should be Byte1=0x00 Byte2=0x00: Manual Ex: Subnet Mask=255.255.255.0, the return E1 0x01: DHCP value: Byte3~9 are reserved, should be 0x00. Byte1=0x02, Byte2=0xFF, Byte3=0xFF, (2) If Byte1=0x01(IP Address) at Input value, Byte4=0xFF, Byte5=0x00, Byte6~9=0x00. the return value should be Ex: IP address=169.254.81.38 Byte1=0x01 (same as Byte1 at Input value) Byte2=0xA9 (=169), Byte3=0xFE (=254), Byte4=0x51(=81), Byte5=0x26 (=38) Byte6~9 are reserved, should be 0x00. (3) If Byte1=0x02~0x05 at Input value, refer to (2) (4) If Byte1=0x06(MAC Address) at Input value, the return value should be Ex: MAC address=00:22:64:7E:2C:82 Byte1=0x06 (same as Byte1 at Input value) Byte2=0x00, Byte3=0x22, Byte4=0x64, Byte5=0x7E, Byte6=0x2C, Byte7=0x82 Byte8~9 are reserved, should be 0x00. V1.0 20 / 20 Commercial Display RS-232 Protocol