BenQ PH460 RS232 Commands for PDP and IFP Products - Page 12
PC Get-function command to LCD Monitor
View all BenQ PH460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
5 6 Byte1 Byte2 0x51 ('Q') 0x69 ('i') 7 Byte3 0x73 ('s') 8 Byte4 0x64 ('d') 9 Value Byte5 0x61 ('a') 10 Byte6 0x00 11 Byte7 0x00 12 Byte8 0x00 14 15 Byte10 0x00 Byte11 0x00 16 17 Value Byte12 Byte13 0x00 0x00 18 Byte14 0x00 19 Byte15 0x00 20 CR 0x0D 13 Byte9 0x00 PC Get-function command to LCD Monitor Get Function Len ID Cmd Cmd Value Range (ASCII Bytes) Type Code (Hex) Model Info 20 ʳ g 20 (1) Input value: Byte1 - Byte2 Byte3...Byte15 Byte2~Byte11=0x00 Byte1=0x01: Get Customer Name Byte1=0x02: Get Customer Model Name Byte1=0x03: Get Qisda Model Name Byte1=0x04: Get Scaler Firmware Version Byte1=0x05: Get LAN Firmware Version Byte1=0x06: Get Serial Number (2) Return value: Byte1 - Byte2 - ʳ Byte3...Byte15 The Byte1 value at the return value should be the same as the value of Byte1 at input value. Byte2~Byte15 should be ASCII format. Ex: If Customer=Generic, Byte1=0x01, Byte2='G', Byte3='e',...Byte8='c', Byte9~Byte11=0x00. Ex: If the Scaler Firmware Version=1.02, Byte1=0x03, Byte2='1', Byte3='.', Byte4='0', Byte5='2', Byte6~Byte11=0x00. Remark V1.0 12 / 20 Commercial Display RS-232 Protocol