BenQ MX620ST Short-Throw HD 3D Wireless Projector MX620 User Manual - Page 47
Function, Description, Standby, Settings, Network, Reset All, Current, System, Status
![]() |
View all BenQ MX620ST Short-Throw HD 3D Wireless Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
5. SYSTEM SETUP: Advanced menu Function Standby Settings Network Settings Reset All Settings Current System Status Description Network Selecting On enables the function. The projector is able to provide the network function when it is in standby mode. Monitor Out Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the COMPUTER jack is correctly connected to devices. See "Connection" on page 16 for how to make the connection. Audio Pass Through The projector can play sound when it is in standby mode and the corresponding jacks are correctly connected to devices. Press / to choose the source that you wish to use. See "Connection" on page 16 for how to make the connection. Enabling this function slightly increases the standby power consumption. See BenQ Network Projector Operation Guide for details. Returns all settings to the factory preset values. The following settings will still remain: Keystone, User 1, User 2, Color Space Conversion, Language, Projector Installation, High Altitude Mode, Security Settings, Baud Rate and Network Settings. Source Shows the current signal source. Picture Mode Shows the selected mode in the PICTURE menu. Lamp Mode Shows the current lamp mode. Resolution Shows the native resolution of the input signal. 3D Format Shows the current 3D mode. Color System Shows the input system format. Equivalent Lamp Hour Displays the number of hours the lamp has been used. Firmware Version Shows the firmware version of your projector. 6. INFORMATION menu Operation 47
![](/manual_guide/products/benq-mw621st-mx620-user-manual-a1fab8f/47.png)