BenQ MH534 User Manual - Page 14
Volume keys VOL, SMART ECO, QUICK INSTALL, ASPECT, Operating the projector from, the front
View all BenQ MH534 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
15. AUTO 19. SMART ECO Automatically determines the best Displays the lamp mode selection bar picture timings for the displayed (Normal/Economic/SmartEco). image. See "Auto-adjusting the image" 20. INFO on page 28 for details. Displays the status information of the 16. Mute Toggles projector audio between on and off. 17. Digital Zoom keys (ZOOM +/-) Magnifies or reduces the projected picture size. See "Magnifying and searching for details" on page 34 for details. 18. Volume keys (VOL / ) projector. 21. QUICK INSTALL Displays the QUICK INSTALL menu including Projector Installation, Test Pattern, and Keystone. 22. ASPECT Selects the display aspect ratio. See "About the aspect ratio" on page 35 for details. Adjusts the sound level. Infra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam. • Operating the projector from the front 14 Introduction Approx. 30°