Beltronics Express 935 Owner's Manual - Page 13

3. Use a screw driver or a small coin to adjust the angle of the suction-cup mount until the base plate is level. 4. Slide detector onto base plate unit, it snaps into place. Note: Some vehicles have a plastic coating on the inside of the wind- shield designed to protect occupants in case of an accident. Use of the windshield bracket on this type of windshield can permanently mark the surface. Check with your dealer if you are unsure whether your vehicle is equipped with this type of windshield. Visor Mounting 1. Remove the mounting bracket cover by pressing on the raised dots and pushing outward. Store the cover in a safe place. 2. Slide the visor clip onto the top of the detector until it snaps into place. Clip the detector to the edge of the sun visor nearest the windshield. Fuse Replacement If the fuse has blown, remove the tip from the lighter plug followed by the old fuse. Replace the fuse with a 1-amp, 3AG fuse. Defeating the fuse protection can damage your unit or your vehicle's electrical system and will void your warranty. 12