Beltronics Express 935 Owner's Manual - Page 10

Reset to Factory Settings You can reset your unit to factory settings for volume, DARK, AUDIO, CITY and Selectable Features. With the unit OFF, press and hold CITY button, then press AUDIO and PWR/VOL buttons simultaneously. The display will briefly show "RESET" and provide two "beeps". Your unit is now reset to its original factory settings and ready for operation. SELECTABLE FEATURES Safety Warning System®, VG-2 Guard® Alert, sws™ Digital Voice Messages and Radar/Laser Digital Voice prompts are features which may be selected ON or OFF, depending upon your preference. Safety Warning System® (sws™) When ON, unit will provide an alarm and text message when signals from sws™ transmitters are detected. Factory setting is ON. VG-2 Guard® Alert When activated, unit will detect signals from Interceptor VG-2 transmitters. Factory setting is OFF. Note-engage VG-2 Guard® only in areas known to use the Interceptor VG-2. Safety Warning System® (sws™) with Digital Voice Messages When "SWSv o i c e " is selected, unit will provide Digital Voice announcements when swsTM transmitters are detected. Factory setting is "SWSv o i c e ". When "SWSc l i c k " is selected, Digital Voice is replaced by "tone/clicking" only. Radar/Laser Digital Voice prompts When "VOICEo n " is selected, unit will provide Digital Voice prompts followed by "beeps" when X/K/Ka and Laser signals are detected. Factory setting is ON. When "VOICEo FF" is selected unit will sound unique audio tones only. 9