Beko WDB7425R2 Owners Manual - Page 30
End Time, 15 Starting the programme, 16 Loading door lock
View all Beko WDB7425R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
5.14 End Time 5.15 Starting the programme - With the End Time function, start of the programme can be delayed up to 24 hours. After pressing the End Time button, the programme's estimated end time will be displayed. If an End Time is set, the End Time light will turn on. To ensure that the End Time function is enabled and the program ends at the end of the defined duration, you should press Start / Pause after setting the duration. The Start/ Pause button will stop flashing and remain on. If you want to cancel End Time function, press the End Time button until the End Time light turns off or press the On/Off button to turn off and on the machine. 1. Open the loading door, place the laundry and add detergent, etc. 2. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions. 3. Press the End Time button to set the desired end time. The End Time light will turn on. 4. Press the Start / Pause button. Countdown will start. ":" sign in the middle of the end time on the display will start flashing. C INFORMATION • Do not use liquid detergents when you enable the End Time function! Stains might remain on the clothes. • The door will remain locked during the End Time countdown. If you want to unlock the door, press the programme start/ pause button to switch the machine to pause mode. At the end of the countdown, End Time indicator turns off, washing cycle starts and the time of the selected programme appears on the display. • When End Time is selected, the time displayed on the screen consists of the end time plus the duration of the selected programme. 1. Press the Start/Pause button to start the programme. 2. The flashing light of the Start/Pause button will remain on, indicating that the programme has started. 3. Loading door will be locked. When the door is being locked, "Locking Door" warning will be displayed. 5.16 Loading door lock There is a locking system on the loading door of the machine that prevents opening of the loading door when the water level is unsuitable to open the door. "Loading door locked" light on the panel turns on when the loading door is locked. C INFORMATION • The door will be locked if the Remote Control function is selected. To open the door, you need to press the Remote Control key or change the programme position to deactivate the Remote Control function. Opening the loading door in case of power failure: C INFORMATION • In case of a power failure, you can use the loading door emergency handle under the pump filter lid to manually open the loading door. A WARNING! • Before opening the loading door, make sure that there is no water in the machine to avoid flooding. 30 / EN Washer-Dryer / User's Manual