Beko WDB7425R2 Owners Manual - Page 23

Press the Temperature Adjustment key to change the temperature. C INFORMATION • Temperature Adjustment button works only backwards. For example, if the display shows 40°C but you want to select 60°C, you will need to press the button for a few times until you reach 60°C from 40°C. C INFORMATION • If you scroll to Cold Wash option and press the Temperature Adjustment button again, the recommended maximum temperature for the selected programme will appear on the display. To decrease the temperature, press the Temperature Adjustment button again. Finally, the Cold light will turn on, indicating cold wash. You can also change the temperature after the washing cycle has started. You can select the desired temperature after the washing programme has started. However, you need to do this before the heating step starts. 5.7 Spin speed selection - Whenever a new programme is selected, the spin speed recommended for the selected programme appears on the Spin Speed indicator. C INFORMATION • It is possible that the recommended spin speed is not the highest value that can be selected for the relevant programme. Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. C INFORMATION • Spin Speed Adjustment button works only backwards. For example, if the display shows 800 rpm but you want to select 1000 rpm, you will need to press the button for a few times until you reach 1000 rpm from 800 rpm. 5.7.1 If you want to spin your laundry after the Rinse Hold function: - Adjust the Spin Speed. - Press the Start/Pause button. Programme will resume. The machine will drain the water and spin the clothes. If you want to drain the water at the end of the programme without spinning, you can use the No Spin function. C INFORMATION • If you press the Spin Speed adjustment button in programmes where the spin speed is not allowed, the spin speed setting will not change and you will hear a warning. You can also change the spin speed after the washing cycle has started. After the washing cycle has ended, you can press the spin speed adjustment button to select a spin speed. However, you need to do this before the spinning step begins. 5.7.2 Auxiliary function selection for drying - When you select a new washing programme, press the Auxiliary Function Selection button to set the drying option suitable for this programme. C INFORMATION • If you press the Drying auxiliary function button in programmes where the drying step is not allowed, the drying light will not change and you will hear a warning. 23 / EN Washer-Dryer / User's Manual