Beko DTLCE70051 Owners Manual - Page 14
Warning indicators, 7 Starting the programme, 8 Child Lock, 9 Changing the programme after it, is
View all Beko DTLCE70051 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Changing the delay time If you want to change the time during countdown, turn the on/off/program selection knob to cancel the program. Select the desired program and repeat the delayed start process. Cancelling the delayed start function If you wish to cancel the delayed start countdown and start the program right away, rotate the on/off/program selection knob to cancel the program. Select the desired program and press "Start/Pause". 5.6 Warning indicators C NOTE • Warning indicators may vary depending on the model of your dryer. Filter cleaning When the programme is completed, the warning indicator for filter cleaning turns on. Water tank If the water tank fills up while the programme continues, the warning indicator starts flashing and the machine goes into stand-by. In this case, empty the water tank and start the programme by pressing the Start / Standby button. Warning indicator turns off and programme resumes. Filter drawer /Heat exchanger cleaning When the programme is finished, the cleaning symbol of the heat exchanger or filter drawer may light up. 5.7 Starting the programme Press the Start/Stand-by button to start the programme. Drying indicator will light up, indicating that the programme has started. 5.8 Child Lock The drying machine has a child lock which prevents the programme flow from being interrupted when the buttons are pressed during a programme. When the child lock is activated, all buttons on the panel except the On/Off/Programme selection knob are deactivated. Press the End Time and Buzzer buttons simultaneously for 3 buttons to activate the child lock. The child lock has to be deactivated to be able to start a new programme after the current programme is finished or to be able to interfere with the programme. To deactivate the child lock, keep the same buttons pressed for 3 seconds. 14 C NOTE • When the child lock is activated, the child lock warning indicator on the screen turns on. • Child lock deactivates when the drying machine is turned off and on by the On/ Off/Cancel knob. When the child lock is active: When the drying machine runs, or in standby state, the indicator symbols won't change upon changing the position of the programme selection knob. C NOTE • When the drying machine runs and the child lock is active, it beeps twice when the programme selection knob is turned. If the child lock is deactivated without returning the programme selection knob to its previous position, programme will terminate due to the change in the programme selection knob position. 5.9 Changing the programme after it is started You can change the programme you selected to dry your laundry with a different programme after the drying machine starts running • For instance, select Extra Dry programme by turning the On/Off/Programme selection knob to select Extra Dry instead of Iron Dry. • Press the Start/Stand-by button to start the programme. Adding and removing clothes during stand-by If you want to add or remove clothes to/from the drying machine after the drying programme starts: • Press the Start/Stand-by button to put the drying machine in Stand-by state. The drying operation stops. • Open the loading door while in Standby state, and close the door after you remove or add laundry. • Press the Start/Stand-by button to start the programme. Dryer / User Manual